WEBVTT 00:00:06.164 --> 00:00:07.885 A very warm hello, everyone. 00:00:07.925 --> 00:00:15.809 I’ve got a product for you today that you may have already heard of: our new Door lock drive – pro. 00:00:15.849 --> 00:00:16.989 What’s it all about? 00:00:17.029 --> 00:00:24.973 Well, basically, it’s an evolution of the old Door Lock Drive – a completely new design with brand-new technology behind it, 00:00:24.993 --> 00:00:26.354 which I’ll get to in a moment. 00:00:27.094 --> 00:00:35.223 But there’s also another design option now, meaning a total of four design options compared to the old Door Lock Drive, 00:00:35.244 --> 00:00:38.347 which comes in silver, white and anthracite. 00:00:39.572 --> 00:00:45.113 Before we start setting it up in the app, I’d like to tell you a bit about the requirements 00:00:45.133 --> 00:00:48.054 that your door must meet. 00:00:48.074 --> 00:00:53.195 Because here we have one of these Door Lock Drives, already installed on the door. 00:00:53.215 --> 00:01:02.317 And I’ll just turn this door leaf briefly for you so you can see what the installation requirements are. 00:01:02.337 --> 00:01:11.286 Firstly, as with the old classic Door Lock Drive, we have the option of clamping it onto the protruding lock cylinder. 00:01:11.306 --> 00:01:16.034 However, this always means that the lock cylinder must protrude slightly from the door leaf. 00:01:17.112 --> 00:01:24.058 Additionally, we can also use the screw connection on your escutcheon. 00:01:24.078 --> 00:01:29.602 This is a new installation option that has emerged with the Pro door-edge drive. 00:01:29.642 --> 00:01:37.769 And a third installation option is provided by full-surface bonding over the lock cylinder. 00:01:37.809 --> 00:01:43.414 This means there is no need for any protrusion, and no drill holes are required for a rosette. 00:01:43.434 --> 00:01:46.036 It is simply bonded over the entire surface. 00:01:46.737 --> 00:01:58.872 And you can see another important aspect that I don’t want to leave out here: the door key must be shortened due to the very shallow installation depth of the 00:01:58.932 --> 00:02:00.993 Door Lock Drive – pro. 00:02:01.013 --> 00:02:09.778 You can, of course, have this done directly by a locksmith, or you can order a suitable key for Knauf cylinders straight away. 00:02:09.818 --> 00:02:11.679 That’s also an option. 00:02:11.719 --> 00:02:21.585 Once all these requirements are met, you can, of course, install and fit the product and start using it via the Romatic IP app. 00:02:22.325 --> 00:02:28.630 I’ve already set the product up for you here, and I’d like to show you some of the technical features in a moment, 00:02:28.650 --> 00:02:30.192 show you the functions. 00:02:30.212 --> 00:02:38.879 An important aspect of the initial setup is that a wizard actually guides you step by step through the assembly and installation. 00:02:38.939 --> 00:02:42.662 An automatic calibration run also takes place. 00:02:42.722 --> 00:02:49.467 You actually have very little to do yourself, apart from opening the door at one point and then closing it again later. 00:02:49.487 --> 00:02:51.349 The rest happens fully automatically. 00:02:51.869 --> 00:03:04.018 And then this device appears; I’ll tap it briefly in the app, here in your overview of the Door Lock Drive Pro, and it offers a wide variety of 00:03:04.058 --> 00:03:07.321 features, which we’ll now go through step by step. 00:03:07.361 --> 00:03:10.423 Let’s start straight away with the first point: the operation lock. 00:03:10.443 --> 00:03:15.808 As is usual with our devices, you have an internal device button here, a system button. 00:03:16.688 --> 00:03:22.951 This button here is responsible for unlocking and locking the door without you having to do it via the app, 00:03:22.991 --> 00:03:25.833 i.e. directly by pressing the button on the device. 00:03:25.853 --> 00:03:27.213 I’ll show you quickly. 00:03:27.233 --> 00:03:31.996 As I do this, the locking bolt moves into the unlocked or locked position. 00:03:44.997 --> 00:03:51.980 And to prevent anyone from accidentally pressing this button and thereby locking or unlocking the door, you can decide for yourselves 00:03:52.000 --> 00:04:00.724 whether the button should be operable at all, or perhaps whether it can be used in combination with the time profile. 00:04:01.864 --> 00:04:09.948 The second point, locking and unlocking times, well, that simply defines exactly when the door should be unlocked or 00:04:09.968 --> 00:04:14.170 lock, i.e. automatic locking and unlocking. 00:04:14.210 --> 00:04:21.334 For me here, for example, a locking time is already set: every day of the week, Monday to Sunday, 00:04:21.354 --> 00:04:24.956 the door is to be locked at 10.30 pm. 00:04:25.016 --> 00:04:34.264 But of course, you can also use the ‘+’ button to set another time, select the days of the week and then specify, for example, 6.30 pm, 00:04:34.303 --> 00:04:36.266 the door will automatically re-lock itself. 00:04:37.464 --> 00:04:39.446 Auto-lock and whisper mode. 00:04:39.486 --> 00:04:44.931 Yes, there is actually something new here that you won’t have seen before on the old Door Lock Drive. 00:04:44.991 --> 00:04:52.098 Auto-lock, yes, that’s a feature you’re already familiar with, or rather, it’s a feature you’ll recognise from the old Door Lock Drive. 00:04:52.118 --> 00:04:59.805 This is actually something that happens when you unlock the door, even though it’s currently locked, for example using your handheld remote, 00:04:59.825 --> 00:05:05.050 then after a certain time the door will automatically lock again. 00:05:05.089 --> 00:05:11.737 So let’s imagine you come home in the evening after 10 pm, the door is already locked, you press the open button, 00:05:11.777 --> 00:05:21.326 go inside, and then, with Auto Relog, after a certain time has elapsed – for example, five minutes – the door will automatically lock again, 00:05:21.346 --> 00:05:23.666 to secure the house. 00:05:23.707 --> 00:05:27.009 You can set the time intervals for this to happen yourselves. 00:05:27.049 --> 00:05:37.055 Here, I’ve set it up to run at any time from Monday to Sunday, so it always happens: the door is supposed to 00:05:37.075 --> 00:05:37.875 be locked again. 00:05:37.895 --> 00:05:40.116 However, you can restrict this. 00:05:40.156 --> 00:05:51.654 It’s important to note that in this case, a new feature has been added: locking the door when it closes via the internal sensor. 00:05:51.695 --> 00:05:57.996 You’ll find such a magnet included with the new Pro Door Lock Drive. 00:05:58.036 --> 00:06:04.377 This is stuck to the door frame near the Door Lock Drive. 00:06:04.416 --> 00:06:07.017 You need to imagine it at roughly this height. 00:06:08.826 --> 00:06:19.615 So it doesn’t actually move when the front door is opened; it stays in position on the door frame and the opening of the door is then effectively detected by the 00:06:19.675 --> 00:06:21.297 Door Lock Drive Pro. 00:06:21.357 --> 00:06:26.380 Okay, now the magnet is no longer nearby and the door has been opened. 00:06:26.801 --> 00:06:33.607 So, in principle, it replaces a traditional door or window contact that you would otherwise have to install on the door. 00:06:33.647 --> 00:06:44.581 So, if the door is now locked or simply closed in this case, the Door Lock Drive detects this and can perform an auto-lock. 00:06:44.621 --> 00:06:48.907 But we also have a feature here, such as whisper mode. 00:06:48.947 --> 00:06:58.716 Another new feature, whisper mode, runs the Door Lock Drive at a reduced speed and thus also at a reduced volume. 00:06:58.796 --> 00:07:00.818 It’s really barely audible. 00:07:00.838 --> 00:07:07.262 And you can also specify that whisper mode applies during this time period that I’ve defined here. 00:07:08.062 --> 00:07:13.445 But you could also say, I only want to activate whisper mode at certain times. 00:07:14.927 --> 00:07:20.172 for example, in whisper mode, only for weekly schedules or Autorelog journeys. 00:07:20.212 --> 00:07:21.874 Otherwise, the following could happen. 00:07:21.914 --> 00:07:31.764 You’re standing in front of the front door, wanting to go inside, press the open button, and then the Door Lock Drive runs at its reduced 00:07:31.784 --> 00:07:35.948 and it takes a bit longer before you actually get into the house. 00:07:36.088 --> 00:07:37.570 Yes, well, of course you get in. 00:07:38.030 --> 00:07:45.354 But then it takes, instead of, I don’t know, two, three, four seconds, perhaps ten seconds for the door to open. 00:07:45.394 --> 00:07:49.836 Because the reduced speed would also be taken into account then. 00:07:49.876 --> 00:07:55.099 In my case, for example, I’ve only linked the whisper mode to specific time periods. 00:07:55.119 --> 00:08:02.903 When I open the door via the app or using a door key fob remote, the normal speed is used. 00:08:04.019 --> 00:08:08.362 Yes, so as you can see, Auto Redox, whisper mode – quite a lot has actually changed there. 00:08:08.903 --> 00:08:13.426 Yes, and the door status sensor – I’ve just shown you that here. 00:08:13.446 --> 00:08:17.730 Part of it is a magnet; the sensor itself is located in the door actuator. 00:08:17.770 --> 00:08:24.074 You can, of course, enable or disable this here if you don’t wish to use it. 00:08:24.935 --> 00:08:26.456 Secure locking. 00:08:26.496 --> 00:08:31.078 This is also an interesting feature that you’ll already be familiar with from the old Door Lock Drive. 00:08:31.118 --> 00:08:39.862 Here, a door contact is used to detect whether the door was still open when locking. 00:08:40.362 --> 00:08:47.270 Previously, you always needed a separate door/window contact for this, such as our optical window contact. 00:08:47.309 --> 00:08:50.493 Now this is done right here using these magnets. 00:08:50.513 --> 00:08:57.982 If it is detected that the door was open when locking, a corresponding warning is displayed in the HOMATIC IP app. 00:08:59.102 --> 00:09:03.085 The closing direction is actually detected automatically. 00:09:03.105 --> 00:09:05.487 This product features automatic calibration. 00:09:05.527 --> 00:09:09.409 You don’t need to specify whether the closing direction is left or right. 00:09:09.469 --> 00:09:17.475 However, you do need to specify whether you have a door knob or a door handle on the outside, because that determines 00:09:17.515 --> 00:09:23.659 whether the door can actually open or merely unlocks. 00:09:23.679 --> 00:09:30.524 The neutral position, rotation – all these are things that are carried out during calibration. 00:09:30.564 --> 00:09:38.769 The hold time during opening – we can look at that again – is as follows: when the Door Lock Drive not only unlocks and locks, 00:09:38.809 --> 00:09:50.190 i.e. this locking bolt is moved, but the door is actually opened here as well – the door drive can do that too, 00:09:50.230 --> 00:09:54.312 then you can specify for how long it should be held. 00:09:54.372 --> 00:10:02.437 For example, for 0.4 seconds – that’s the standard time – for three seconds, or even for five seconds. 00:10:02.457 --> 00:10:09.780 Especially with doors that don’t close or open properly, it’s worth trying a slightly longer hold time. 00:10:09.801 --> 00:10:12.163 Especially if it’s a bit stiff, that can definitely make sense. 00:10:12.783 --> 00:10:20.587 Bear in mind, however, that this will reduce battery life, as the motor has to run continuously. 00:10:20.667 --> 00:10:24.969 But there’s also a cool new technical feature in this product. 00:10:25.009 --> 00:10:31.511 We’ve got a brand-new power supply using a total of four AA batteries. 00:10:32.472 --> 00:10:41.997 That is, four AA cells, which give a standard battery life of 1.5 years under normal use. 00:10:42.037 --> 00:10:45.078 So, once again, a real step forward. 00:10:45.098 --> 00:10:52.043 The internal device button, which I’ve just shown you, can of course also be configured in the settings. 00:10:52.063 --> 00:10:58.567 Currently, this is set to alternate between locking and unlocking with a short press. 00:10:58.587 --> 00:11:05.171 With a long press, the door would open – in other words, the latch would be released. 00:11:05.191 --> 00:11:10.015 However, we can also specify that, for example, I don’t want any action to occur when the button is pressed briefly. 00:11:10.035 --> 00:11:16.099 With a long press, on the other hand, the door should unlock or lock, whichever you prefer. 00:11:16.139 --> 00:11:18.140 You have a great deal of freedom here. 00:11:19.100 --> 00:11:24.280 You can also set up a notification when the door is opened. 00:11:24.321 --> 00:11:25.681 I’ll demonstrate this for you. 00:11:25.701 --> 00:11:35.183 Because if this sensor actually detects that the door has been open for a certain amount of time, for example longer than five minutes, 00:11:35.203 --> 00:11:43.765 then you’ll receive a message straight away from the Homatik IP app saying: ‘Attention, the door has been open for longer than five minutes.’ 00:11:43.945 --> 00:11:50.117 And you wouldn’t even be able to tell that straight away. 00:11:50.157 --> 00:12:00.182 The device itself contains not only a magnetic contact and a magnetic sensor, but also a position and vibration sensor. 00:12:00.202 --> 00:12:08.407 That means if someone is standing at the door and really shaking it, the vibration sensor will detect that. 00:12:08.447 --> 00:12:10.808 You can also adjust the sensitivity for this. 00:12:11.568 --> 00:12:19.774 And if someone tries to completely rip the door off its hinges, then a position detection can actually trigger here, 00:12:19.814 --> 00:12:26.039 which generates an additional alert within a specific angle range that you can set yourself. 00:12:27.040 --> 00:12:29.903 Tampering is, by the way, another important issue. 00:12:29.923 --> 00:12:33.006 It’s not just position and vibration detection that’s possible. 00:12:33.046 --> 00:12:42.275 Even if someone actually tries to tamper with the door lock here, opening the battery compartment, you’ll immediately receive a notification in the Romatic IP app. 00:12:42.956 --> 00:12:44.638 Action when unlocking. 00:12:44.678 --> 00:12:47.761 Another great feature I’d like to show you again. 00:12:47.801 --> 00:12:54.868 Here, you have the option to specify what else should happen when the Door Lock Drive is unlocked. 00:12:54.908 --> 00:13:04.018 Where you would otherwise have had to write automation rules, you can now simply specify directly here that when the door is unlocked, the alarm mode should be switched to disarmed 00:13:04.058 --> 00:13:14.227 or, alternatively, that ‘When the door is unlocked and the alarm mode is active, an alarm is triggered by the door lock sensor’. 00:13:14.247 --> 00:13:22.275 There are also a few other ways to work with the door contact switch. 00:13:23.453 --> 00:13:31.535 Yes, and apart from that, we’ve got a few technical aspects here such as the angle range, limit stop, locked, unlocked and the audible feedback, 00:13:31.556 --> 00:13:38.279 I might be able to show you that briefly again, because whenever you actually perform an action on the Door Lock Drive here, 00:13:38.299 --> 00:13:45.922 unlock, lock, whatever, there’s a brief audible confirmation – which you can, of course, also deactivate here, 00:13:45.942 --> 00:13:54.445 which is particularly useful, for example, when you lock the door in the evening and then use the slow locking mode, 00:13:54.465 --> 00:14:00.327 i.e. the reduced rotation speed, then you might not want to hear a loud BEEP at the end, 00:14:00.367 --> 00:14:07.069 but of course you can also select here that you don’t want the device to provide any audible feedback. 00:14:07.549 --> 00:14:12.793 Yes, and that takes us through all the features of the new Pros Door Lock Drive. 00:14:12.873 --> 00:14:17.236 As you can see, a lot has been added – many new features that you can now use. 00:14:17.276 --> 00:14:25.921 Of course, you’ll then need to integrate the product into an access control system if you wish to use it with a remote control, Keypads or even your smartphone 00:14:25.961 --> 00:14:26.702 . 00:14:26.722 --> 00:14:29.864 But there are also videos on our channel that I can recommend to you. 00:14:29.904 --> 00:14:37.169 Just have a look at them, because it’s actually no different from our old Door Lock Drive that you’re already familiar with. 00:14:37.729 --> 00:14:38.830 Right, how are things with you? 00:14:38.870 --> 00:14:45.653 Are you perhaps already using the Door Lock Drive and considering switching to the new Pro Door Lock Drive? 00:14:45.693 --> 00:14:49.135 Feel free to write in the comments, and of course if you have any questions. 00:14:49.155 --> 00:14:50.956 Feel free to share your thoughts in the comments. 00:14:50.996 --> 00:14:53.517 Give it a thumbs up and subscribe to the channel.